- FIRE COMMANDER 2 FUNCTIONS LEVEL 3 INSTALL
- FIRE COMMANDER 2 FUNCTIONS LEVEL 3 MANUAL
- FIRE COMMANDER 2 FUNCTIONS LEVEL 3 SERIES
Make certain that the unit has proper ventilation during operation. Immediately shut the unit off and disconnect from the power source. If the unit is exposed to liquids serious damage can occur. The unit should not be operated near water. The AC cord should fit firmly and securely into the chosen AC receptacle. Never expose the AC cord to excess heat or flame. Never remove or modify the grounding feature of the connected AC power cord. The unit should be connected to an AC power source of the correctly rated voltage. Replace the lid and get ready to enjoy your music system as never before. The “magic eye” tube installs in the tube socket in the front behind the round center window of the front panel.
FIRE COMMANDER 2 FUNCTIONS LEVEL 3 INSTALL
Carefully insert the appropriate tubes in their sockets paying particular attention to install them without damage to the sockets. Once inside the tube bases are clearly seen and labelled on the circuit board V1-V4.
FIRE COMMANDER 2 FUNCTIONS LEVEL 3 SERIES
At this point remove the lid to the preamplifier by removing the series of phillips screws around the edges of the lid. The boxes are labelled V1-V4 and “magic eye”. This is done to further attempt to avoid damage occurring during shipping. The Commander is shipped with the tubes stored in 5 white boxes imbedded in the foam endcaps along with the remote control. Shipping the Commander preamplifier in any packaging other than the original packaging materials could result in voiding of the warranty repair coverage. It is important to keep all of the original custom packaging materials for any future need you might have to ship the preamplifier. Contact Wells Audio immediately if any damage is found. At this point we recommend that you check the preamplifier carefully for any damage that may have occurred during shipping. To remove the amplifier from it's packing, simply open the box, remove the preamplifier and its foam end caps, and set it on a firm, flat, stabile surface, and then remove the foam end caps. The packaging for the Commander preamplifier is simple, elegant and effective in protecting the Commander during shipping.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of an electric shock to persons. Please refer to an authorized dealer or to Wells Audio for qualified service personnel only. To reduce the risk of fire or electric shock do not remove cover.
WARNING! To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.ĬAUTION: To prevent electric shock do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. REGULATORY COMPLIANCE AND SAFETY INFORMATION To activate the warranty, fill out the included warranty card fully and send in within 30 days of purchase.
FIRE COMMANDER 2 FUNCTIONS LEVEL 3 MANUAL
We recommend that you save this manual and the original packaging for future use.
Please read the instructions carefully and completely before attempting to operate the unit. We know that you have many choices when it comes to your personal electronics and we deeply appreciate your choice of a Wells Audio product. I would like to personally thank you for your purchase of the Wells Audio Commander preamplifier.
0 kommentar(er)
